Bachelor of Engineering (Mechanical) (Honours)
Make things happen. Mechanical engineers design, build and maintain complex machines and mechanical systems from the very small to the very large scale. Learn the finer points of engineering and machine design, fluid mechanics, and production engineering which will enable you to make systems and machinery for diverse industries from transport to medical devices.
In this program you will:
- Study fundamentals of engineering, including applied maths, physics, statics, and systems design
- Complete specialist courses in mechanical design, materials, manufacturing, and fluids and heat transfer
- Understand social, economic and environmental dimensions of engineering, and the importance of sustainable development
- Develop advanced problem solving, communication and project management skills
- Specialise in areas such as electrical and electronic engineering, mechatronic engineering, town planning studies and supply chain management.
Location
CRICOS code
Entry threshold
ATAR/RankDuration
Full-time or equivalent part-time Only a full-time option is available to international students on a Student visa. Online programs are not available to Student visa holders.Indicative fees
Indicative 2025 fees (A$)
CSP Annual fee / Estimated total feeQTAC code
Start
- Semester 1
- Semester 2
- Semester 1
- Semester 2
Limited Minors available at UniSC Moreton Bay.
- Start
-
- Semester 1
- Semester 2
- Semester 1
- Semester 2
- Delivery mode
-
- Blended Learning
- Total courses
- 32
- Total units
- 384
- Duration
- 4 years 4 years
- CRICOS code
- 090700D
- UniSC program code
- SC411
Introductory courses (8) 96 units
ENG101 Introduction to Marketing
ENG102 Communication Theory and Practice
ENG103 Public Relations: Contemporary Perspectives
ENG104 Introduction to Journalism
MTH103 Introduction to Creative Advertising
MTH104 Foundations of Engineering
SCI107 Engineering Statics
SCI110 Introduction to the Internet of Things
Developing courses (8) 96 units
MEC200 Introduction to Engineering Design
MEC205 Introduction to Applied Mathematics
MEC221 Introductory Calculus
MEC225 Physics
MEC226 Science Research Methods
MEC227 Introduction to Thermofluids
MTH201 Dynamics 1*
MTH203 Mechanics of Materials
Graduate courses (12) 144 units
ENG302 Engineering Materials*
ENG304 Manufacturing Technology*
ENG401 Mechanical Design 1*
ENG402 Calculus II and Linear Algebra
MEC300 Numerical Analysis
MEC301 Engineering Project Management
MEC302 Engineering Research Methodology
MEC303 Engineering Project 1
MEC335 Engineering Project 2
MEC336
MEC400
MEC405
Minor courses (4) 48 units
Students must select one minor (48 units) from the following:
- Electrical and Electronic Engineering (for Mechanical Engineers)**
- Mechatronic Engineering (for Mechanical Engineers)**
- Civil Engineering (for Mechanical and Mechatronic Engineers)
- Climate Change and Coastal Zone Studies
- Environmental Studies for Engineers^
- Management for Engineers^
- Town Planning Studies^
- Public Health for Engineers^
- Visualisation and Animation
- Wider Engineering Studies
^Not available at Moreton Bay campus
**Not available at Sunshine Coast campus
-
Honours
The Bachelor of Engineering (Civil) (Honours) may be awarded with Honours. The class of Honours to be awarded to a student is dependent upon:
- the percentage results achieved by study or transfer in twelve courses (144 units) as specified in the table below; and
- the student achieving at least 65% in ENG402 .
Courses MTH203 MEC301 ENG302 MEC303 MEC335 MEC336 MEC300 ENG304 ENG401 ENG402 MEC405 MEC400 A student must complete a minimum of 8 courses (96 units) in the table and the research project for an honours grade to be awarded.
The minimum levels of achievement normally required for each class of honours are shown in the following table:
Honours results classification Overall Percentage attained in Specified Courses* Honours Class I 80% - 100% Honours Class IIA 70% - 79% Honours Class IIB 60% - 69% *The percentage result shall be rounded up if ≥ 0.5 or rounded down if < 0.5.
Note: Program structures are subject to change. Not all UniSC courses are available on every UniSC campus.
Entry requirements
For entry into most USC undergraduate degree programs, you need to have completed a minimum level of education similar to successful completion of Australian Year 12 with good grades.
Further studies, for example, a semester or more at college or university, can also be considered for entry and may give you credit transfer towards a degree.
Some examples of upper secondary qualifications and a guide to the minimum grades that USC will consider are listed here. These are minimum requirements and do not guarantee entry. Some programs may require higher grades. Alternative qualifications may also be considered on a case by case basis.
If your qualification (grouped by country) is not listed, send the qualification transcripts with your application form to the International Office for assessment.
English language requirements
You will also need to meet the English language requirements for this program. If you do not meet the minimum requirements, you may be able to enrol in our English Language Programs to reach the required level for most of UniSC’s programs (exceptions apply to non-standard English requirement programs).
Minimum entry threshold
Applicants must meet the minimum ATAR/Rank.
| Location | ATAR/Rank |
|---|---|
| Sunshine Coast | 60.00 |
| Moreton Bay | 60.00 |
Post admission requirements
Students must complete 60 days of suitable field experience.
Additional entry information
Applicants from a non-English speaking background should refer to the English language requirements for further information.
Exemption for first year Mathematics
High achieving mathematics students can apply for exemptions to introductory mathematics and calculus subjects. However, exempted courses will need to be replaced with engineering relevant courses to fulfil the requirements of the degree. Apply through the School of Engineering.
- Prerequisites
English (Units 3 and 4, C)
- Recommended prior study
- Maths Methods and/or Specialist Maths; and Physics or Chemistry
In order to graduate you must:
- Successfully complete 384 units as outlined in the Program Structure
- Complete a minimum of 60 days of suitable work experience. Students must meet all costs associated with the acquisition of practical experience to satisfy this requirement
Program notes
- Completing this program within the specified (full-time) duration is based on studying 48 unit points per semester (normally 4 courses) and following the recommended study sequence
- The unit value of all courses is 12 units unless otherwise specified
- It is each students responsibility to enrol correctly according to your course requisites, program rules and requirements and be aware of the academic calendar dates
- Courses within this program are assessed using a variety of assessment methods including essays, seminar presentations, reports, in-class tests and examinations. Not all courses will necessarily include all methods
- As part of your UniSC program, you may apply to Study Overseas to undertake courses with an overseas higher education provider
- Refer to the Managing your progression page for help in understanding your program structure, reviewing your progress and planning remaining courses.
WIL notes
- Refer to Engineering - Work Experience
- CSP estimate
- A$7,252 - 2023 Fees
- Annual tuition fee (A$, 2025)
- A$30,000
- Estimated total tuition fee (A$, 2025)
- A$120,000