Bachelor of Engineering (Mechatronic) (Honours)
Help engineer the future. Forget about robots coming to take your job – instead, make it your job to design the robots and automated systems of the future! Mechatronics is an exciting field that combines the best of mechanical, electrical and electronic and computer engineering to create new technologies and constantly improve the systems around us
In this program you will:
- Study the fundamentals of engineering, including applied maths, physics, statistics and system design
- Learn about robotics and autonomous systems, communication engineering, digital logic and computer programming, machine vision and more
- Choose the area you want to specialise in, including electrical and electronic or mechanical engineering, management or entrepreneurship
- Gain hands-on project management experience
Location
CRICOS code
Entry threshold
ATAR/RankDuration
Full-time or equivalent part-time Only a full-time option is available to international students on a Student visa. Online programs are not available to Student visa holders.Indicative fees
Indicative 2025 fees (A$)
CSP Annual fee / Estimated total feeQTAC code
Start
- Semester 1
- Semester 2
- Start
-
- Semester 1
- Semester 2
- Delivery mode
-
- Blended Learning
- Total courses
- 32
- Total units
- 384
- Duration
- 4 years 4 years
- CRICOS code
- 0100795
- UniSC program code
- SC405
Introductory courses (8) 96 units
ENG101 Property B
ENG102 Corporations Law
ENG103 Geographic Information Science and Technology
ENG104 Integrated Environmental Management
MTH103 Equity & Trusts
MTH104 Civil Procedure
SCI107 Indigenous Peoples and the Environment
SCI110 Environmental Economics
Developing courses (8) 96 units
ELC200 Administrative Law
ELC201 Evidence
ELC205 Professional Conduct
MEC200 Regulation
MEC205 K'gari-Fraser Island Field Studies
MEC221 Special Field Studies Topic
MEC225 Special Research Project
MCH200 Sustainability Project
Graduate courses (12) 144 units
MTH201 Workplace Learning I
MTH203 Introduction to Computer Networks
ELC301 Wireless Communications
ELC304 Network Management and Security
ENG302 Architecture and Systems Integration
ENG304 Foundations of Engineering
MCH301 Engineering Statics
MEC336 Introduction to the Internet of Things
ELC400 Introduction to Engineering Design
ENG401 Introduction to Applied Mathematics
ENG402 Introductory Calculus
MCH400 Physics
Minor courses (4) 48 units
Students must select one of the following minor study areas:
- Electrical and Electronic Engineering (for Mechatronic Engineers)
- Mechanical Engineering (for Mechatronic Engineers)
- Civil Engineering (for Mechanical and Mechatronic Engineers)
- Climate Change and Coastal Zone Studies
- Environmental Studies for Engineers^
- Management for Engineers^
- Wider Engineering Studies
^Not available at Moreton Bay campus.
Honours
The Bachelor of Engineering (Mechatronic) (Honours) may be awarded with a class of Honours to a
student:
- with the percentage results achieved in twelve courses as specified in the table below; and
- achieving at least 65% in ENG402 Engineering Research Project 2.
| Courses |
| MTH203 Science Research Methods |
| MCH200 Digital Logic and Computer Programming |
| ELC301 Analog Electronic Circuits |
| MEC336 Control Systems |
| ENG302 Thermofluids 1 |
| MCH301 Dynamics 1 |
| ELC304 Mechanics of Materials |
| ENG304 Engineering Materials |
| ENG401 Mechatronic Design 1 |
| ENG402 Calculus II and Linear Algebra |
| ELC400 Numerical Analysis |
| MCH400 Communications Engineering (Hardware and protocols) |
- The minimum levels of achievement normally required for each class of honours are shown in the following table:
| Honours results classification | Overall Percentage attained in Specified Courses* |
| Honours Class I | 80% - 100% |
| Honours Class IIA | 70% - 79% |
| Honours Class IIB | 60% - 69% |
*The percentage result shall be rounded up if ≥ 0.5 or rounded down if < 0.5.
Note: Program structures are subject to change. Not all USC courses are available on every USC campus.
Entry requirements
For entry into most USC undergraduate degree programs, you need to have completed a minimum level of education similar to successful completion of Australian Year 12 with good grades.
Further studies, for example, a semester or more at college or university, can also be considered for entry and may give you credit transfer towards a degree.
Some examples of upper secondary qualifications and a guide to the minimum grades that USC will consider are listed here. These are minimum requirements and do not guarantee entry. Some programs may require higher grades. Alternative qualifications may also be considered on a case by case basis.
If your qualification (grouped by country) is not listed, send the qualification transcripts with your application form to the International Office for assessment.
English language requirements
You will also need to meet the English language requirements for this program. If you do not meet the minimum requirements, you may be able to enrol in our English Language Programs to reach the required level for most of UniSC’s programs (exceptions apply to non-standard English requirement programs).
Minimum entry threshold
Applicants must meet the minimum ATAR/Rank.
| Location | ATAR/Rank |
|---|---|
| Moreton Bay | 61.00 |
Post admission requirements
Students must complete 60 days of suitable engineering work experience.
Additional entry information
Applicants from a non-English speaking background should refer to the English language requirements for further information.
Exemption for first year Mathematics
Students who enter the program having achieved a ‘Very High Achievement’ in Maths C in secondary school may be eligible for an exemption for the courses MTH103 Introduction to Applied Mathematics and MTH104 Introductory Calculus. On application, and approval, to Student Services and Engagement, students may substitute two engineering-relevant courses in order to fulfil the requirements of the degree. Students are advised to consult with the program coordinator when selecting substitute courses.
- Prerequisites
English (Units 3 and 4, C), Maths Methods (Units 3 and 4, C)
- Recommended prior study
- Specialist Maths; and Physics or Chemistry
Program requirements
In order to graduate you must:
- Successfully complete 384 units as outlined in the Program Structure
- Select a minor from one of the minors as listed below. Students must choose the minor to be studied before the completion of Semester 1, Year 3
- Complete a minimum of 60 days of suitable work experience. Students must meet all costs associated with the acquisition of practical experience to satisfy this requirement
Program notes
- Completing this program within the specified (full-time) duration is based on studying 48 unit points per semester (normally 4 courses) and following the recommended study sequence
- The unit value of all courses is 12 units unless otherwise specified
- It is each students responsibility to enrol correctly according to your course requisites, program rules and requirements and be aware of the academic calendar dates
- Courses within this program are assessed using a variety of assessment methods including essays, seminar presentations, reports, in-class tests and examinations. Not all courses will necessarily include all methods
- As part of your USC program, you may apply to Study Overseas to undertake courses with an overseas higher education provider
- Refer to the Managing your progression page for help in understanding your program structure, reviewing your progress and planning remaining courses.
- CSP estimate
- A$7,008
- Annual tuition fee (A$, 2025)
- A$29,600
- Estimated total tuition fee (A$, 2025)
- A$118,400