Bachelor of Engineering (Mechanical) (Honours) | UniSC | University of the Sunshine Coast, Queensland, Australia

Accessibility links

Non-production environment - edittest.usc.edu.au
This page was archived on 21 August 2022 and is no longer updated.

Bachelor of Engineering (Mechanical) (Honours)

Make things happen. Mechanical engineers design, build and maintain complex machines and mechanical systems from the very small to the very large scale. Learn the finer points of engineering and machine design, fluid mechanics, and production engineering which will enable you to make systems and machinery for diverse industries from transport to medical devices.

In this program you will:

  • Study fundamentals of engineering, including applied maths, physics, statics, and systems design
  • Develop in-depth skills in electrical and electronic engineering theory, standards, and practice
  • Complete specialist courses in circuit design and analysis, electrical power systems (including renewable energy), robotics and automation, computer programming and more
  • Understand social, economic and environmental dimensions of engineering, and the importance of sustainable development
  • Develop advanced problem solving, communication and project management skills
  • Can specialise in areas such as electrical and electronic engineering, mechatronic engineering, town planning studies and supply chain management

Location

CRICOS code

090700D

Entry threshold

61.00 61.00 ATAR/Rank
ATAR/Rank

Duration

4 years 4 years Full-time or equivalent part-time Only a full-time option is available to international students on a Student visa. Online programs are not available to Student visa holders.
Full-time or equivalent part-time Only a full-time option is available to international students on a Student visa. Online programs are not available to Student visa holders.

Indicative fees

Indicative 2025 fees (A$)

A$7,008 CSP
CSP
A$29,600 / A$118,400 Annual fee / Estimated total fee
Annual fee / Estimated total fee

QTAC code

013741 014741

Start

  • Semester 1
  • Semester 2
  • Semester 1
  • Semester 2

Limited Minors available at UniSC Moreton Bay.

Start
  • Semester 1
  • Semester 2
  • Semester 1
  • Semester 2
Delivery mode
  • Blended Learning
Total courses
32
Total units
384
Duration
4 years 4 years
CRICOS code
090700D
UniSC program code
SC411
Program structure
Introductory courses (8) 96 units

ENG101 The Meetings, Incentives, Conventions and Exhibitions (M.I.C.E) Industry
ENG102 World of Work: Your Pathway to Employment
ENG103 Business, Governance and Society
ENG104 Tourism, Leisure and Sport Policy and Planning
MTH103 Communication and Thought
MTH104 Think Health
SCI107 Introductory Bioscience
SCI110 Introduction to Behavioural Health

Developing courses (8) 96 units

MEC200 Indigenous Wellbeing Foundations
MEC205 Public Health Foundations
MEC221 Introduction to Indigenous Australia
MEC225 Health Research and Evidence
MEC226 Health Promotion Needs Assessment and Planning
MEC227 Working Effectively with Aboriginal People
MTH201 Introduction to Management
MTH203 An Introduction to Australian and Comparative Politics

Graduate courses (12) 144 units

ENG302 Environment and Health
ENG304 Introduction to Sociology: Society, Culture and Change
ENG401 Indigenous Wellbeing Practice
ENG402 Health Promotion Implementation and Evaluation
MEC300 Science Research Methods
MEC301 Indigenous Wellbeing Research
MEC302 Health Practicum
MEC303 Foundations of Engineering
MEC335 Engineering Statics
MEC336 Introduction to the Internet of Things
MEC400 Introduction to Engineering Design
MEC405 Introduction to Applied Mathematics

Minor courses (4) 48 units

Students must select one minor (48 units) from the following:

^Not available at Moreton Bay campus

**Not available at Sunshine Coast campus

  • Honours

    The Bachelor of Engineering (Civil) (Honours) may be awarded with Honours. The class of Honours to be awarded to a student is dependent upon:

    • the percentage results achieved by study or transfer in twelve courses (144 units) as specified in the table below; and
    • the student achieving at least 65% in ENG402 Introductory Calculus.
    Courses
    MTH203 Physics
    MEC301 Science Research Methods
    ENG302 Thermofluids 1
    MEC303 Dynamics 1
    MEC335 Mechanics of Materials
    MEC336 Engineering Materials
    MEC300 Manufacturing Technology
    ENG304 Mechanical Design 1
    ENG401 Calculus II and Linear Algebra
    ENG402 Numerical Analysis
    MEC405 Engineering Project Management
    MEC400 Engineering Research Methodology

    A student must complete a minimum of 8 courses (96 units) in the table and the research project for an honours grade to be awarded.

    The minimum levels of achievement normally required for each class of honours are shown in the following table:

    Honours results classification Overall Percentage attained in Specified Courses*
    Honours Class I 80% - 100%
    Honours Class IIA 70% - 79%
    Honours Class IIB 60% - 69%

    *The percentage result shall be rounded up if ≥ 0.5 or rounded down if < 0.5.

    Note: Program structures are subject to change. Not all USC courses are available on every USC campus.

Study sequences

Entry requirements

For entry into most USC undergraduate degree programs, you need to have completed a minimum level of education similar to successful completion of Australian Year 12 with good grades.

Further studies, for example, a semester or more at college or university, can also be considered for entry and may give you credit transfer towards a degree.

Some examples of upper secondary qualifications and a guide to the minimum grades that USC will consider are listed here. These are minimum requirements and do not guarantee entry. Some programs may require higher grades. Alternative qualifications may also be considered on a case by case basis.

If your qualification (grouped by country) is not listed, send the qualification transcripts with your application form to the International Office for assessment.

English language requirements

You will also need to meet the English language requirements for this program. If you do not meet the minimum requirements, you may be able to enrol in our English Language Programs to reach the required level for most of UniSC’s programs (exceptions apply to non-standard English requirement programs).

Minimum entry threshold

Applicants must meet the minimum ATAR/Rank.

Location ATAR/Rank
Sunshine Coast 61.00
Moreton Bay 61.00

Post admission requirements

Students must complete 60 days of suitable field experience.

Additional entry information

Applicants from a non-English speaking background should refer to the English language requirements for further information.

Exemption for first year Mathematics

High achieving mathematics students can apply for exemptions to introductory mathematics and calculus subjects. However, exempted courses will need to be replaced with engineering relevant courses to fulfil the requirements of the degree. Apply through the School of Engineering.

Prerequisites

English (Units 3 and 4, C), Maths Methods (Units 3 and 4, C)

Recommended prior study
Specialist Maths; and Physics or Chemistry
Program requirements
Program requirements

In order to graduate you must:

  • Successfully complete 384 units as outlined in the Program Structure
  • Complete a minimum of 60 days of suitable work experience. Students must meet all costs associated with the acquisition of practical experience to satisfy this requirement
  • The acceptability or otherwise of employment experience, and the period of that type of experience that may be credited towards the 60 days, will be determined by the Program Coordinator.
  • In nearly all cases students find and obtain the required experience as part of paid vacation employment during the summer break.
  • Students complete their work experience programs in an area of their choice, and in the majority of cases they do so within commuting distance of their residential addresses.
Program notes
  • Completing this program within the specified (full-time) duration is based on studying 48 unit points per semester (normally 4 courses) and following the recommended study sequence
  • The unit value of all courses is 12 units unless otherwise specified
  • It is each students responsibility to enrol correctly according to your course requisites, program rules and requirements and be aware of the academic calendar dates
  • Courses within this program are assessed using a variety of assessment methods including essays, seminar presentations, reports, in-class tests and examinations. Not all courses will necessarily include all methods
  • As part of your USC program, you may apply to Study Overseas to undertake courses with an overseas higher education provider
  • Not available to international students on a Student Visa
  • Refer to the Managing your progression page for help in understanding your program structure, reviewing your progress and planning remaining courses.

CSP estimate
A$7,008
Annual tuition fee (A$, 2025)
A$29,600
Estimated total tuition fee (A$, 2025)
A$118,400