Bachelor of Engineering (Mechatronic) (Honours) | UniSC | University of the Sunshine Coast, Queensland, Australia

Accessibility links

Non-production environment - edittest.usc.edu.au
This page was archived on 14 July 2020 and is no longer updated.

Bachelor of Engineering (Mechatronic) (Honours)

Help engineer the future

Forget about robots coming to take your job – instead, make it your job to design the robots and automated systems of the future. Mechatronics is an exciting field that combines the best of mechanical, electrical and electronic and computer engineering to create new technologies and constantly improve the systems around us. With automation set to play an increasing role in almost every product and industry, this degree will give you skills that are in demand and future-proof your engineering career.

Study location
  • Moreton Bay^
Refer to the program footnotes
CRICOS code
0100795
Commence
Semester 1
Program length (full-time)
4 years full time or equivalent part time
Annual tuition fee 2020
A$29,600
Estimated total tuition fee *
A$118,400
Footnotes
  • Only a full-time option is available to international students on a Student visa. Online programs are not available to Student visa holders.
  • * Estimated tuition fees are based on 2025 rates. Refer to international fees for more information.
  • Not all majors/minors and elective options are available at every campus. You should refer to the What Can I Study tab, and the proposed study sequence for your chosen campus and intake for further information.
  • ^First year courses offered at Moreton Bay campus from Semester 1, 2020.
Study location QTAC code
  • Moreton Bay ^ 014721
Refer to the program footnotes
Minimum selection threshold
ATAR - 63.15 OP - 15 Rank - 68
UniSC program code
SC405
Commence
Semester 1
Duration
4 years full time or equivalent part time
Study mode
Blended Learning
Prerequisites
English (4, SA) Maths B (4, SA)
Recommended prior study
Maths C and Physics or Chemistry
Fee type 2020
  • Commonwealth supported places
Total courses
32
Total units
384
Footnotes
  • ^First year courses offered at Moreton Bay campus from Semester 1, 2020.

Forget about robots coming to take your job – instead, make it your job to design the robots and automated systems of the future. Mechatronics is an exciting field that combines the best of mechanical, electrical and electronic and computer engineering to create new technologies and constantly improve the systems around us. With automation set to play an increasing role in almost every product and industry, this degree will give you skills that are in demand and future-proof your engineering career.

In this degree you will:

  • Study the fundamentals of engineering, including applied maths, physics, statistics and system design
  • Learn about robotics and autonomous systems, communication engineering, digital logic and computer programming, machine vision and more
  • Choose the area you want to specialise in, including electrical and electronic or mechanical engineering, management or entrepreneurship
  • Get hands-on project management experience by designing your own major engineering research project
Career opportunities

Mechatronics engineers work across a range of fields, including robotics engineering, industrial engineering and product design, manufacturing, data communications, automotive and more.

Membership

Engineering students are eligible for free membership to Engineers Australia. Once their degree is complete they are eligible for Graduate membership.

Accreditation

This program is currently undergoing provisional accreditation by Engineers Australia.

Program structure

Introductory courses (8) 96 units

COR109 Video Game Analysis
ENG101 Serious Game Project A
ENG102 Serious Game Project B
ENG103 Communication and Thought
ENG104 Foundations of Engineering
MTH103 Engineering Statics
MTH104 Introduction to the Internet of Things
SCI107 Engineering Statics

Developing courses (8) 96 units

ELC200 Introduction to Economics
ELC201 Introduction to Applied Mathematics
ELC205 Introductory Calculus
MEC200 Physics
MEC205 Digital Logic and Computer Programming
MEC221 Electronic Circuits: Fundamental Theory and Applications
MEC225 Introduction to Environmental Management
MCH200 Introduction to Environmental Management

Graduate courses (12) 144 units

MTH201 Thermofluids 1
MTH203 Dynamics 1
ELC301 Mechanics of Materials
ELC304 Engineering Materials
ENG302 Mechatronic Design 1
ENG304 Calculus II and Linear Algebra
MCH301 Numerical Analysis
MEC336 Communications Engineering (Hardware and protocols)
ELC400 Embedded System Design
ENG401 Engineering Project Management
ENG402 Engineering Research Methodology
MCH400 Mechatronic Design 2

Minor courses (4) 48 units

Students must select one of the following minor study areas:

Honours

The Bachelor of Engineering (Mechatronic) (Honours) may be awarded with a class of Honours to a
student:

  • with the percentage results achieved in twelve courses as specified in the table below; and
  • achieving at least 65% in ENG402 Engineering Research Project 2.
Courses
MTH203 Engineering System Design
MCH200 Robotics and Autonomous Systems
ELC301 Engineering Project 1
MEC336 Engineering System Design
ENG302 Engineering Project Management
MCH301 Mechatronic Design 2
ELC304 Embedded System Design
ENG304 Engineering Research Methodology
ENG401 Engineering Project 1
ENG402 Engineering Project 2
ELC400 Robotics and Autonomous Systems
MCH400 Image Processing and Machine Vision
  • The minimum levels of achievement normally required for each class of honours are shown in the following table:
Honours results classification Overall Percentage attained in Specified Courses*
Honours Class I 80% - 100%
Honours Class IIA 70% - 79%
Honours Class IIB 60% - 69%

*The percentage result shall be rounded up if ≥ 0.5 or rounded down if < 0.5.

Note: Program structures are subject to change. Not all USC courses are available on every USC campus.

Total units: 384

Program requirements and notes

Program requirements

In order to graduate you must:

  • Successfully complete 384 units as outlined in the Program Structure
  • Select a minor from one of the minors as listed below. Students must choose the minor to be studied before the completion of Semester 1, Year 3
  • Complete a minimum of 60 days of suitable work experience. Students must meet all costs associated with the acquisition of practical experience to satisfy this requirement
Program notes
  • Completing this program within the specified (full-time) duration is based on studying 48 unit points per semester (normally 4 courses) and following the recommended study sequence
  • The unit value of all courses is 12 units unless otherwise specified
  • It is each students responsibility to enrol correctly according to your course requisites, program rules and requirements and be aware of the academic calendar dates
  • Courses within this program are assessed using a variety of assessment methods including essays, seminar presentations, reports, in-class tests and examinations. Not all courses will necessarily include all methods
  • As part of your USC program, you may apply to Study Overseas to undertake courses with an overseas higher education provider
  • Refer to the Managing your progression page for help in understanding your program structure, reviewing your progress and planning remaining courses.